Tapered roller bearing

Gamet bearings A20546 Q160095s1/16017HS1E bearing A22258 bearing A22259 bearing

Enterprise purposes: quality first customer first! 


Benes Bearing have successfully provided quality services for 107 countries and regions.We have an excellent design and development department.

On the basis of these strategies, the mode of product development and manufacturing for mass customization is researched. We can customize products according to the customers' requirement. 

24 hours online : 
service@benesbearing.com
 
Gamet bearings  A20546  Q160095s1/16017HS1E  bearing  A22258 bearing A22259 bearing 

PRINCIPLES OF GAMET TAPERED
ROLLER BEARINGS
The geometry of tapered roller bearings provides certain unique
features: most importantly, the long line contact between roller
and race gives high load carrying capacity and high bearing
stiffness. The ‘on apex’ design ensures a true rolling motion of
the rollers on the raceways, at every point along the roller body.
See Fig 1. In addition, the tapered construction allows the bearing
to carry combinations of radial and thrust load. The small seating
force (x) produced at the rib aligns the rollers to prevent skewing.
See Fig 2.
Other specific features of Gamet
tapered roller bearings include:-
Precision – Gamet bearings are manufactured
only in a high precision class (see page 5).
Hollow Rollers – This assists the flow of lubricant through the
bearing to provide cooling.
Roller Roundness and Calibration – A true roundness of rollers
ensures equal load sharing within the bearing and contributes
significantly to the overall precision of the bearings. Gamet
Rollers are ground between centres to achieve near perfect
roundness. Rollers are then calibrated precisely into matched
sets.
Bearing Cage – The cage has a low coeficient of friction. It
is guided on the inner race to provide radial stability and is
designed to pass sufficient oil across the races to maintain
lubrication, the remainder being diverted through the centre of
the roller. Depending on rotational speed, grease lubrication may
be used as an alternative to oil.



Packaging & Shipping
1.industrial packing+industrial cartons+pallets
2.single brand box+brand cartons+pallets
3.follow customer's requests
A.Plastic Tubes or Single Boxes ( Usually 10pcs in one plastic tube for steel bearings);
B.Cartons ( No more than 30kg for one carton );
C. Pallet ( Usually more than 400kg totally will use pallet )
D. Delivery time :7-35 days ( by sea or by air )
Generally,We will choose the most suitable packing method for products. If you have any special requirements for packing, pleasecontact us in advance.
 
After Sales Service
 
In order to meet the increasing market demand, and better serve the customers, we has built a professional team composed of sales engineers to provide perfect pre-sales and after-sales services.
                                           
We provide consulting services for maintenance, procurement and design staff concerning the basic knowledge, selection, installation and removal, lubrication, maintenance and equipment management of imported bearings.
 
All these services are mean to reduce the installation errors, form good work and safety habits and improve the efficiency of maintenance personnel, thus achieving the best use effect and the maximum bearing life.
 
We also help users analyze the failure of the bearing, confirm the causes, provide solutions for this issue and give suggestions on precautionary measures.
 
 
 
FAQ

Q:What's your after-sales service and warranty?
A: We promise to bear the following responsibilities when defective products were found:
1.12 months warranty from the first day of receiving goods;
2. Replacements would be sent with goods of your next order;
3. Refund for defective products if customers require.

Q:Do you accept ODM&OEM orders?
A: Yes, we provide ODM&OEM services to worldwide customers, we also customize OEM box and packing as your requirements.

Q:What's the MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.

Q:How long is the lead time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days.

Q:Do you offer free samples? 
A: Yes we offer free samples to distributors and wholesalers, however customers should bear freight. We DO NOT offer free samples to end users. 

Q:How to place order?
A: 1. Email us the model, brand and quantity,shipping way of bearings and we will quote our best price for you; 
2. Proforma Invoice made and sent to you as the price agreed by both parts; 
3. Deposit Payment after confirming the PI and we arrange production; 
4. Balance paid before shipment or after copy of Bill of Loading.

 
Contact with us now!
 
 

Customer Who Bought This Item Also Bought



Copyright © 2016-2021 Benes Bearing Co.,Ltd.

Logo